Valid Cisco 800-150 Exam Labs | Braindumps 800-150 Torrent

2025 Latest ITExamSimulator 800-150 PDF Dumps and 800-150 Exam Engine Free Share: https://drive.google.com/open?id=1YZeMrIp5pOLtUHeg4JANjUK6pJfSWo1n

If you download our study materials successfully, you can print our study materials on pages by the PDF version of our 800-150 exam torrent. We believe these special functions of the PDF version will be very useful for you to prepare for your exam. We hope that you will like the PDF version of our 800-150 question torrent. If you try to get the Supporting Cisco Devices for Field Technicians certification that you will find there are so many chances wait for you. You can get a better job; you can get more salary. But if you are trouble with the difficult of Supporting Cisco Devices for Field Technicians exam, you can consider choose our 800-150 Exam Questions to improve your knowledge to pass Supporting Cisco Devices for Field Technicians exam, which is your testimony of competence.

With these real 800-150 Questions, you can prepare for the test while sitting on a couch in your lounge. Whether you are at home or traveling anywhere, you can do 800-150 exam preparation with our Cisco 800-150 dumps. 800-150 test candidates with different learning needs can use our three formats to meet their needs and prepare for the Cisco 800-150 test successfully in one go. Read on to check out the features of these three formats.

>> Valid Cisco 800-150 Exam Labs <<

Pass Guaranteed Fantastic Cisco - Valid 800-150 Exam Labs

ITExamSimulator Cisco 800-150 Exam Questions And Answers provide you test preparation information with everything you need. About Cisco 800-150 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.

Cisco 800-150 Exam Syllabus Topics:

Topic	Details
Topic 1	Networking Foundations: This section of the exam measures the skills of a Network Engineer and covers the basic building blocks of computer networking. It explains different types of networks like local area networks and wireless networks, and introduces lightweight wireless LANs. It describes the layers of communication models like the OSI model and TCP IP stack, and explains how data moves across networks. It also discusses the physical cabling used in networks, such as Ethernet and fiber optics. Students will learn about network switching, IP addressing, subnetting, and routing at Layer 3. The section also introduces Cisco’s campus network devices, data center switches, UCS servers, and collaboration devices, describing their roles and functions in the network.
Topic 2	Cisco Software: This section of the exam measures the skills of a Network Engineer and discusses Cisco’s software systems and licensing. It explains the difference between IOS install and bundle modes and gives an overview of different licensing models. Students learn how to manage Cisco software images, including backing up, transferring, and installing images via FTP, TFTP, or USB. It also covers how to handle configuration files to keep devices running properly and ensure smooth upgrades or replacements.
Topic 3	Cisco UCS and Data Center Architecture: This section of the exam measures the skills of a Data Center Engineer and introduces Cisco’s UCS and data center solutions. It explains the devices found in a data center, including switches, UCS servers, and director switches, and describes different server deployment models. Students will also learn about virtualization components like virtual machines, hypervisors, cloud computing concepts, and deployment models. The section covers how Cisco UCS devices fit into campus networks, edge locations, and data centers, and explains the key components and connections used in UCS architecture.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q60-Q65):

NEW QUESTION # 60
Which two configuration parameters are most critical to ensure optimal performance when configuring a network port for a newly installed IP phone in an enterprise environment? (Choose two.)

A. QoS classification
B. VLAN assignment
C. Spanning Tree Protocol
D. Power over Ethernet
E. Link aggregation

Answer: B,D

Explanation:
When configuring a network port for a newly installed IP phone, two critical parameters to ensure optimal performance are:
* VLAN Assignment:Assigning the correct VLANs is essential for segregating voice and data traffic.
Typically, a separate voice VLAN is configured to prioritize voice traffic and enhance security.
* Power over Ethernet (PoE):PoE allows the switch to supply power to the IP phone over the same Ethernet cable used for data transmission. This eliminates the need for separate power supplies and simplifies installation.
* While QoS classification (Option E) is important for prioritizing voice traffic, it is typically configured at a broader network level. Link aggregation (Option B) and Spanning Tree Protocol (Option C) are more relevant to network redundancy and loop prevention, respectively, and are not directly critical for the initial configuration of an IP phone port.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification
===

NEW QUESTION # 61
Which command prompt commands provide the most thorough network diagnostic information when troubleshooting connectivity issues between a Windows PC and a Cisco device?

A. nslookup
arp -a
route print
B. netstat -a
netsh wlan show interfaces
ipconfig /release
ipconfig /renew
C. ping
tracert
netstat
D. ipconfig /all
ping

Answer: D

Explanation:
When diagnosing network connectivity issues between a Windows PC and a Cisco device, the combination ofipconfig /allandpingcommands provides comprehensive information:
* ipconfig /all:Displays detailed IP configuration information, including IP addresses, subnet masks, default gateways, DNS servers, and MAC addresses for all network adapters. This information is crucial for verifying correct network settings.
* ping:Tests the reachability of a host on an IP network and measures the round-trip time for messages sent from the originating host to a destination computer. It's a fundamental tool for checking connectivity between devices.
While other commands likenetstat,tracert,nslookup,arp -a, androute printprovide valuable information, ipconfig /allandpingare typically the first and most informative commands used in initial troubleshooting steps.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Troubleshooting Methodologies

NEW QUESTION # 62
Drag and drop the functions from the left onto the corresponding Cisco data center technologies on the right.

Answer:

Explanation:

Explanation:
Integrates multiple network layers into a single infrastructure # Unified Fabric Provides link aggregation and redundancy between switches # Virtual port channels (vPCs) Enables software-defined networking in data centers # Application Centric Infrastructure (ACI) Combines storage and network traffic on a single network # Fibre Channel over Ethernet (FCoE) These data center solutions are covered in theFLDTEC courseunder Cisco's unified data center architecture and switching portfolio:
Unified Fabric:Streamlines Layer 2 and Layer 3 into a single operational model, reducing complexity and enhancing scalability.
vPC (Virtual Port Channel): Allows two Nexus switches to appear as one logical switch, enablingloop-free topologyandactive-active uplinks.
ACI (Application Centric Infrastructure): Cisco's SDN solution, delivering centralized automation, policy enforcement, and fabric management.
FCoE: Enableslossless Ethernetforstorage (Fibre Channel)traffic to coexist withdatatraffic on the same Ethernet infrastructure.
These technologies are fundamental in modern Cisco-powered data centers tooptimize performance,reduce hardware, andsimplify management.

NEW QUESTION # 63
What is the first action that must be taken before removing a standby supervisor module from a Cisco MDS
9700 Series Switch?

A. Put themodule into out-of-service mode.
B. Perform a manual failover to the standby supervisor.
C. Shut down the entire switch.
D. Disconnect all network interface cables.

Answer: A

Explanation:
In theFLDTEC course, the process for removing or replacing asupervisor module- especially thestandby supervisor- in a modular switch like theCisco MDS 9700is clearly outlined. Cisco documentation states:
"Before removing a standby supervisor module, it must first be placed into out-of-service mode using the CLI command system no supervisor <slot-number> or via the appropriate management interface." This action ensures the systemacknowledges the supervisor is no longer participating in redundancy, allowing a safe and controlled removal without impacting system operations.
Why not the other options?
* A. Shut down the entire switch# Not required; MDS switches are built for high availability and allow hot-swap operations.
* C. Disconnect all network interface cables# This applies to line cards or interfaces, not to supervisor removal specifically.
* D. Perform a manual failover# Failover is requiredwhen removing the active supervisor, not the standby one.

NEW QUESTION # 64
Which two settings are standard Cisco console connections when configuring a terminal emulator to connect to the console port of a Cisco switch? (Choose two.)

A. Stop bits: 2
B. Flow control: Hardware
C. Data bits: 8
D. Speed (baud rate): 9600
E. Parity: Even

Answer: C,D

Explanation:
When configuring a terminal emulator (such as PuTTY, Tera Term, or HyperTerminal) to connect to the console port of a Cisco switch, the standard settings are as follows:
* Speed (baud rate): 9600This is the default transmission speed for Cisco console ports, ensuring compatibility across various devices.
* Data bits: 8This setting specifies that each character transmitted consists of 8 data bits, which is standard for most serial communications.
* Parity: NoneNo parity bit is used, meaning there is no additional error-checking bit appended to each character.
* Stop bits: 1One stop bit indicates the end of a character transmission.
* Flow control: NoneNo flow control is employed, allowing continuous data transmission without hardware or software-based pausing.
Therefore, optionsC (Speed: 9600)andD (Data bits: 8)are correct. Options A (Stop bits: 2), B (Flow control:
Hardware), and E (Parity: Even) deviate from the standard settings and may result in communication issues if configured.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification

NEW QUESTION # 65
......

With the rapid development of society, people pay more and more attention to knowledge and skills. So every year a large number of people take 800-150 tests to prove their abilities. But even the best people fail sometimes. In addition to the lack of effort, you may also not make the right choice on our 800-150 Exam Questions. A good choice can make one work twice the result with half the effort, and our 800-150 study materials will be your right choice.

Braindumps 800-150 Torrent: https://www.itexamsimulator.com/800-150-brain-dumps.html

2025 Latest ITExamSimulator 800-150 PDF Dumps and 800-150 Exam Engine Free Share: https://drive.google.com/open?id=1YZeMrIp5pOLtUHeg4JANjUK6pJfSWo1n

Our Blog

Greg Stone Greg Stone

Biography

Valid Cisco 800-150 Exam Labs | Braindumps 800-150 Torrent

Pass Guaranteed Fantastic Cisco - Valid 800-150 Exam Labs

Cisco 800-150 Exam Syllabus Topics:

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q60-Q65):